Koksan 'K-080' PET Resin is suitable for injection, injection stretch blow molding and extrusion application mainly for carbonated soft drinks, water bottles, alcoholic beverages, households, oil, agrochemicals, wide mouth containers, PET sheets and film extrusion.
Specification KOKSAN PET type K-080
Property | Unit | Value | Test Method |
Intrinsic Viscosity | dL/g | 0.80±0.02 | ISO 1628-5 |
Acetaldehyde | ppm | max. 1 | ASTM F-2013-01 |
Color L* | min. 90 | ASTM D-6290 | |
Color B* | Max.（+1） | ASTM D-6290 | |
Melting Point | ℃ | 246±2 | DIN 53765 |
Moisture Content | % | max. 0.2 | DIN 51777 Part 2（09/74） |
Chip Size | g/100 chips | 1.6±0.2 | IQ 10692 |
Fines | ppm | max. 100 | IQ 10702 |
Remark：
The above results confirm our specification for type K-080.
All above mentioned results are based on KOKSAN PET Resin Laboratory conditions and its analytical methods shown. Any other/different analysis methods or conditions may give other/different values. KOKSAN PET Resin material will be accompanied by its Certificate of Analysis, with the relative representative average values of specified method/results.
KOKSAN PET Resin shall not be responsible for the use of any products compliance, methods related to quality specifications and required regulations. No other warranty, either expressed or implied, regarding the suitability of the product for any particular purpose is made. Buyers must take their own determination about safety, health, environment protection and suitability of use for their intended purpose. No warranty is made of the merchantability or fitness of any products.
